HAS-110Z Indoor Siren

HAS-110Z Indoor Siren


GHAS-110Z receives the signal from Z-Wave controller or sensor and sends siren alarm and turns on strobe light. It can be triggered by Z-Wave enabled sensor or controller.

Features & Benefits

  • Sends siren alarm and turns on strobe light when being triggered
  • Supports Z-Wave 2-way mesh networking
  • Easy to install and associate with Z-Wave host controller or Z-Wave device
  • Wireless range up to 30m indoor
  • Used for indoor
  • Long battery life  



Wireless Communication

Protocol Z-Wave 2-Way Mesh Networking
Frequency 860-930MHz
Range Up to 100ft Indoor Line of Sight

Power Requirements

Batteries 4x AA Type

 Operational 0°C to 40°C

Storage -20°C to 60°C

Humidity 10% to 85% Non-Condensing

Protection Degree Indoor

Tamper/Program Switch

Tamper switch is designed to prevent Siren from being forcibly removed from the wall, which is also used for device inclusion/exclusion/association.

System Requirements

Installed Green Net Design Scenario Gateway (e.g. GHSC-48), or

Any Z-Wave Enabled Controller or Sensor

Dimensions & Weight

Sensor (LxWxD) 115.5x77x40mm

Product Weight 250g


HAS-110Z Indoor Siren