GHSW-112Z

GHSW-112Z

The GHSW-112Z and GHSW-120Z are Z-Wave enabled device which allows you to wirelessly control the on/off status of two appliances. It can also connect with mechanical switch for local control.

The GHSW-112Z and GHSW-120Z are also repeater in the Z-Wave network. Acting as a bridge for communication, it will automatically forward Z-Wave commands to their destinations if the originating controller is out of range from the destination node.

Features & Benefits

  •  Wirelessly controls the on/off status two connected lights or electrical appliances
  •  Can work with legacy single-pole switches for local control
  •  Also as a Z-Wave repeater to extend the RF coverage
  •  Supports Z-Wave 2-way mesh networking, RF range up to 20m indoors
  •  Easy to install and associate with Z-Wave host controller or Z-Wave device
  •  Max loading (each load): Resistive 5A, Tungsten 500W, Fluorescent 250VA

 

Wireless Communication

Protocol Z-Wave 2-Way Mesh Networking
Frequency 908.42MHz (US), 868.42MHz (Europe), 921.42 (Australia)

Range Up to 20m Indoor Line of Sight, in Unobstructed Environment

Environmental
Operational 0C to 45C
Storage -20C to 60C
Humidity 10% to 85% Non-Condensing

Protection Degree Indoor

 Button
 Program button for Device Inclusion, Association and On/Off Control for Plug-in Appliance
 LED Indication

LED Color Red

 LED Trigger Device Status
 Plug in Load
 Loading Max Each Channel: Resistive 5A, Tungsten 500W, Fluorescent 250VA
  Electrical Rating 120VAC, 60HZ (US); 220VAC, 50Hz (Europe), 230-240V, 50Hz (Australia)
System Requirements
Installed Green Net Design Scenario Gateway (e.g. GHSC-48/GHVR-200Z), or
Z-Wave Enabled Multi-Channel Controller (e.g. GHSK-100Z)
Certifications

CE, FCC, UL, Z-Wave

Available Colors

White and Black

GHSW-112Z